LOW PLATFORM WHITH ONE AXIS
KIT OF FOUR AGGREGATES STORAGE
- Set gross capcity 32 m3.
- Fall of barren to batcher belt by means of eight mouths of unloading with closing helmets actions by pneumatic cylinders.
- Made in plate of 4 and 5 mm, bracings with profiles laminated, and sheetmetal fold.
- Equipped with two electrical vibrators.
PARAMENTO OF ATTACHMENT SANDS
BATCHER BELT (Four support)
- Smooth band of 650 mm with 4 canvas.
- Capacity of 2 m3 by cycle.
- Head Roller vulcanized Ø 325 mm.
- Tensile roller Ø 325 mm.
- Lead rollers Ø 89 mm with watertight bearings.
- Distance between rollers 300 mm.
- Made in plate of 4 and 5 mm.
- Chassis in UPN 140, bracings profiles laminated in cold.
- Gears Motor of 10 Hp.
- Weight system with 4 load cells of 2.000 Kg.
- Equipped with one electrical vibrators.
ELEVATION BELT
- Approximate length 8100 mm.
- Rib band of 800 mm.
- Head roller vulcanized Ø 325 mm.
- Tensile roller Ø 325 mm.
- Lead rollers Ø 89 mm with watertight bearings.
- Chassis made in tube of 1\"and 1 1/4\" in lattice.
- Gears Motor of 10 Hp.
- Fairing with plastic canvas.
- Equipped with emergency stop.
UNLOADING HEAD.
- Direct cement and entrance barren to mixture truck with sleeves of connection.
SET OF FOUR “ FLUIDIFICADORES” (Two units)
- Equipped with electro valves.
FILTER OF CARTRIDGES
- Filter made in aluminum and polystirol, with cartridges in synthetic wave material
- Filter surface 14 ms2.
- Pneumatic cleaning System compressed air impulses.
FILTER SUPPORT
- Connected to vent of silo by means of flexible pipe.
- Storage for cement collection with manual opening.
SECURITY VALVE
CEMENT ENDLESS SCREWS (Two units)
- Diameter Ø219 mm.
- Length 5.000 mm.
- Made with spiral and steel tube.
- Gears Motor of 7,5 Hp connected directly to the axis.
- Production for: 60 Tm/hour.
CEMENT BATCHER
- Useful capacity 1.000 kg.
- Made in plate of 3 mm.
- Open/Close pneumatic system of butterfly.
- Pneumatic vibrator.
- Weigh system by three load cells.
- Open/Close door electronic control system.
ENDLESS SCREWS FOR LOAD MIXER TRUCK
- Diameter Ø275
- Approximate length 7500 mmm.
- Made with spiral and steel tube.
- Gears Motor of 12,5 HP connected directly to the axis
- Production: 60 Tm/hour
SET OF WATER DESPENSER AND PRESSURE GROUP
- Electronic programming
- Water passage by 2 inch tube with impulse of 1 to 10 liters.
- Pneumatic opening
- Pressure group of 5,5HP with little boiler of 100 liters.
PNEUMATIC INSTALLATION
- Electro valves to activate cylinders.
- Block box to protect the valves.
- Pneumatic cylinders to dvrive gates and valves.
- Stock and installation of tube tecatlon 8 xs 10.
- General distributor.
- Lubricating kit.
CONTROL PANEL AND ELECTRICAL SYSTEM
- Equipment in independent operation.
- It behaviour like a visualizer of weight or accountant by screen service you can watch the weight dosed in a batcher and the component with manual counted.
- It allows to dose directly from the control panel selecting previous recorded formulates and can be send too from a compatibility application.
CHARACTERISTIC
- Real time clock.
- 32 exits and 24 entrances.
- Posibility to integrate the equipment into a persona computer.
- Keyboard and printer.
ELECTRICAL ASSEMBLY AND INSTALLATION
- It includes necessary equipment to insert plant electrical system.
MECHANICAL ASSEMBLY
IT WILL BE ON BEHALF OF THE CLIENT:
- Add tax (I.V.A.) 16%.
- Crane service
- Transports.
- Water until on building site.
- Electrical power until building site with corresponding protections.
- Building site allowed by law.
- Offer will be useful for thirty days.
- Diets and displacements of electrician and mechanical employees.
Autovehicule
